HOW ABOUT 30 SECONDS PER BOARD?

HIDfast is the fastest, easiest way to get a fastener free surface for a lasting, beautiful appearance. Patented, worry-free, stainless steel fasteners are collated for easy handling and quick loading. Patent pending pneumatic tool delivers precise, consistent, effortless, installation.

What makes the HIDfast system so fast? Pure and simple, there is NO hardware! No screws, no clips, no clamps. How about installing a 16' Deck board every 30 seconds? If that sounds unrealistic, then you need to watch this video and see for yourself. All you need is the pneumatic tool, a package of HIDfast fasteners, and a HIDfast rubber mallet that comes with the tool, and you’re ready to go. Now you can install decking 5 times faster than conventional screws, or nails.

What makes the HID-Fast and Edge-Fast system so fast? Easy — there is NO hardware! No screws, no clips, and no clamps. Installation takes about 30 seconds per board. If that sounds unrealistic, then you need to watch HID-Fast videos and see for yourself. All you need is the pneumatic Hid Fast or Edge Fast tools, a package of hidden deck fasteners, and the rubber mallet that comes with the tool, and you're ready to go. Now you can install decking five times faster than conventional screws or nails!

Fasteners

• HIDfast can install 8 boards 8 feet long in a little over 3 minutes
• Conventional 2-1/2″ deck screws installed with a cordless driver, will install 1-1/2 boards in the same time as above
• HIDfast can be over 5 times faster than conventional screws
• HIDfast can do approximately 100 square feet in 10 minutes
• HIDfast can be over 80% faster than a conventional installation
• No visible fasteners in the surface of decking, for better appearance
• No surface fasteners that may pop up
• No surface penetrations that allow water in, causing rot, splitting and cracking
• Boards lock to each other and to the joist for the strongest frame possible
• Collated fasteners for easy handling, and fast loading

Tool the Pro's use

The Hidfast is the No1 choice for decking pros. Save time.. Save money!

EDGEFAST

Place it once and shoot twice! EDGE Fast locks two edges of PVC and most wood square edge decking with just one placement over the joist. EDGE Fast makes a positive connection of decking to joist without any lateral movement.

The EDGE Fast Patent Pending pneumatic tool has interchangeable decking gap guides from 0, 1/8", 3/16" & 1/4", or a custom gap of your choice. Patent Pending Fasteners have a stepped cross section for strength and to avoid splitting the joist below. Fasteners double point keep a true drive at either pivot point. Patent Pending Fasteners are collated for easy handling and quick loading. Available in 304 stainless steel or more economical EDGEcoat steel (ACQ Approved). 

Read Less