Versadjust Pedestal | V1-18 or V1-316 by Bison
*minimum purchase of 6 pedestals per order
DETAILS:
-
Material: high density polypropylene plastic
-
2 models to choose from: V1-18, V1-316
-
Model V1-18: Pedestal with ā ” (3.175 mm) tab
-
Model V1-316: Pedestal with 3/16” (4.5 mm) tab
-
Note: Bison recommends 3/16″ tabs when using Bison Wood Tiles
-
Height Range: 2-1/4” - 2-3/4” (57 - 70 mm)
-
Base Diameter: 8” (203.2 mm)
-
Weight: 1.5 lbs (0.68 kg)
-
Weight bearing: supports 1250 lbs (567 kg) FoS:3 per Pedestal
Product SPECS
WHAT’S INCLUDED:
-
Pedestal - 1
-
Quick-clip extenders to reach up to 36 inches
More details:
-
Made in the USA
-
Unique patented design
-
Each pedestal supports up to 1250 pounds
-
Impervious to water, mold, and freeze-thaw cycles
-
Pedestal bracing system for heights over 24 inches
About this product…
Do you need extra support for your decking? Maybe your decking is built on foundations that are unstable, or maybe the foundations you’re building on are uneven. You might need pedestals to help your decking be level, structurally sound, and sturdy. Perhaps you want your decking elevated. These pedestals are recommended to use with the Bison Tiles.
These Versadjust Pedestals by Bison have many qualities that make these endeavors possible, along with being cost-effective and satisfying. Firstly, these pedestals come in a variety of models, each with different specifications and capabilities. Check out these other listings;
Versadjust Pedestal | V4-18 or V4-316
Versadjust Pedestal | V3-18 or V3-316
Versadjust Pedestal | V2-18 or V2-316
Level.It Adjustable Pedestal | LC-18 or LC-316
Level. It Low Height Pedestal
Level. It Ultra Low Height Pedestal
Secondly, the Versadjust Pedestal | V1-18 or V1-316 models are easy to install, only requiring you to place the pedestals onto your foundation, and your decking on top. The weight of your decking will keep these pedestals in place. After installing these pedestals, you can easily screw-to-adjust their heights to ensure that each contributes to an even decking.
The Versadjust, adjustable V-Series, Pedestal line reaches heights from 2 ¼” to 36” (57.15 to 914.4 mm), has a 1250 lbf FS:3 weight bearing capacity, and contains built in base levelers to compensate for 0” to 1/2” per foot slope (0-4%).
Precise spacer tabs maintain uniform paver spacing and allow for deck drainage, and the screw-to-adjust height setting assures a perfectly level deck.
These pedestals have a broad footprint that provides stability, is impervious to freeze thaw cycles, and offers a range of heights suited to almost any application.
MORE Instructions
Any questions with installation, please call 800-333-4234
Still have questions or need advice on ordering the right supplies for your project? Get in touch with Deck Expressions’ 24/7 customer service. We’re always ready to help.
